A demo of the 3G ZTE MF10 home Wi-Fi & Ethernet router.
Duration : 0:5:35
WELL IT WAS ALL DONE IN ONE TAKE (THE ME PART)
SO SORRY ABOUT THE BAD EDITING MY FIRST EDITED VIDEO SO SORRY ABOUT THE QAULITY
My facebook fan page
http://www.facebook.com/pages/Rob-Music-Project/163762023687942
Duration : 0:4:21
We built a solar table for charging mobile phone, powering mini router WIFI and wireless internet broadband. Multi purpose solar power table.
Duration : 0:12:15
No more driver download or having a different UI to connect mobile broadband or Wi-Fi. Windows 8 will seamlessly install and connect to preferred networks, and it will learn your preferences as you use them.
Duration : 0:5:24
READ !
tip :
if you dont have sakis 3g on your Back track , i suggest yo got another PC with internet , download it , put on removable media .. and copy to back track
commands: gunzip *sakis3g.gz directory ..
chmod +x *sakis3g directory*
note* you can make it execytable by right click or by the above chmod command ..
final command :
*directory of sakis 3g * –interactive
Link for sakis3g :
http://www.sakis3g.org/versions/latest/i386/sakis3g.gz
Thx for watching ..
Duration : 0:2:11
http://Broadbandchoices.co.uk gives you tips on how to cut the cost of using mobile broadband when abroad. International mobile broadband guide for UK providers.
Duration : 0:2:3
Learn what mobile broadband is and how it is changing the way people are staying connected and online.
Duration : 0:2:36
All the files you need are here http://isgood.co.uk/index.php/topic,19.0.html.
Download WinRAR from http://rarlab.com.
To unlock the Huawei D100 / D100T follow these instructions:
Download the firmware from the link above and extract it to your computer:
Before flashing make sure your computer and the Huawei D100 won’t lose power during the process as it could potentially brick your Huawei D100!
Power on the Huawei D100 and connect it to computer through an Ethernet cable
Launch FmcUpdate.exe from the extracted files
Click the “Check” button to detect your Huawei D100 and shift it to update mode
Click the “Upgrade” button to start the update
Wait a couple minutes until the whole progress is accomplished
After upgrade, disconnect the Ethernet cable and push the reset button of the Huawei D100 (in the lower right corner of the backside) or restore factory defaults in the webinterface (open http://192.168.1.1 in your browser and enter “admin” as default password, then go to Advanced Settings | System | Restore Defaults | Restore).
note: If you do not restore to factory defaults after the update, your USB modem won’t be detected properly and the “Connection” page will say “The USB Modem is nonexistent”
Connect your USB modem to the Huawei D100 port only when it’s switched off!
Turn-on the router and go to the GUI by opening http://192.168.1.1 in your browser and enter “admin” as password.
To activate an access profile for your network operator, go to Advanced Settings | Dial Up Settings | Profile Settings and chose your provider from the Profile List. If your provider’s settings are not included, just create a new profile by entering a Profile Name and all the other information required below and click on Save.
Afterwards go to Advanced Settings | Dial Up Settings | PPP Settings and make sure the correct profile is chosen in the Profile List. If not, chose the correct one and hit Apply.
Now your router is ready to share your broadband (remember that your USB modem must also be unlocked!).
You might want to enable (really) secure WiFi-encryption under Advanced Settings | WLAN Settings | WLAN Advance Settings where you should set WPA-PSK|WPA2-PSK as Encryption Mode and TKIP+AES as WPA Encryption. Lastly enter the WPA Pre-Shared Key, which should be not too easy to guess and hit Apply.
Duration : 0:15:44
http://Broadbandchoices.co.uk gives an introduction to the latest mobile broadband gadget – the Mi-Fi – or mobile WiFi. Get wireless internet on the go.
Duration : 0:0:44
Powered by WordPress